OUR SOLUTIONS

Continuous cooking systems
for every production need

Twin-COOK continuous cooking systems are designed for professional kitchens where efficient production, consistency and ease of operation are essential.

01

Twin-COOK Pilot

With 270 mm process width, Twin-COOK Pilot fully-cook 40 to 90 kg (90 to 200 lbs) RTE products per hour. It is the choice for smaller needs, R&D and market introduction of new products. It is the only model in the Twin-COOK family on wheels.

02

Twin-COOK 4.1

Twin-COOK 4.1 fully-cook 70 to 150 kg (150 to 330 lbs) RTE products per hour. The system is made for fixed installation with dedicated extraction.

03

Twin-COOK 4.2

Twin-COOK 4.2 fully-cook 140 to 300 kg (300 to 660 lbs) RTE products per hour. The system is made for fixed installation with dedicated extraction.

04

Twin-COOK 6.2

Twin-COOK 6.2 fully-cook 210 to 450 kg RTE products per hour. The system is made for fixed installation with dedicated extraction.

HMI

All main operating parameters related to top and bottom temperature, process time and product gap are grouped on the main operation screen. Tap the recipe icon to open the recipe page and select a product. The Twin-COOK automatically loads the saved process parameters, and the selected recipe name is shown at the top of the operation screen.

Cleaning

Twin-COOK systems are designed to be efficient cleaned in food preparation environments. Regular cleaning of components exposed to high temperatures, such as heating plates and drive rollers, ensure reliable operation during production. The operation manual defines the recommended cleaning detergents and procedures for regular cleaning and periodical deep cleaning.

Replacing conveyor belts

PTFE conveyor belts are wear parts and typically require replacement after 250–500 operating hours. All Twin-COOK systems are designed to use pre-sealed endless PTFE conveyor belts. This eliminates the need for on-site heat sealing with electrical tools and makes belt replacement faster and more straightforward.

Maintenance

Regular maintenance keep your Twin-COOK system reliable, correctly adjusted and ready cook the products you plan to produce.

Spare parts

CelsiusFOOD Aftermarket Services maintains a dedicated stock of spare parts and PTFE conveyor belts for Twin-COOK systems.

Do you have a project?

Let’s talk about your industrial cooking solution.

01

HMI

The HMI contains several pages divided into two main categories: operator pages for production and recipe management, and for password-protected service pages containing system parameters and settings.

02

Cleaning

For regular cleaning immediately after the process stops, bring the system to safe cleaning conditions using the cool-down program. Remove covers, scrapers and collection pans. These can be cleaned separately in a professional dishwasher. Before washing a system, cover the air intake of the electrical enclosure. Pre-rinse systems with hot water before applying the detergent. After some contact-time, manually brush areas with fat and burnt deposits. Thoroughly rinse with cold water and load the drying program. Important: water or detergents must never be applied to hot surfaces. For heavier deposits, or when required, a more extensive deep cleaning procedure is described in the operation manuals.

03

Replacing conveyor belts

The operation manual provides a complete step-by-step replacement procedure with illustrations. Only a few standard hand tools are required before the used upper and lower belts can be released and pulled off the machine. When fitting a new belt, the sealed joint must always be installed in the correct direction relative to the conveyor travel. Replacing both belts requires about 30 minutes of work. For reliable production planning, we recommend keeping two complete spare sets of PTFE conveyor belts in stock at the production site.

04

Maintenance

Depending on operating hours, certain wear parts must be inspected, adjusted and some must be replaced. The operation manual includes a structured maintenance schedule at 400, 800 and 1,000 operating hours, together with the relevant parts lists and service instructions. Twin-COOK systems are built largely with ISO-standard components and parts from established industrial brands, making many replacement items readily available worldwide.

CelsiusFOOD recommends using original components of the same approved brands. We maintains a stock of spare and wear parts for Twin-COOK systems. The Twin-COOK 4.1, 4.2 and 6.2 are designed for permanent installation and are maintained on site. Maintenance is relatively straightforward. Technical maintenance can be carried out by your own maintenance engineers, a qualified local service provider or CelsiusFOOD engineers. All Twin-COOK systems are equipped with a router for secure remote connectivity. This allows CelsiusFOOD to support on-site technicians with diagnostics when required.

For smaller kitchens without an in-house maintenance engineer, CelsiusFOOD also offers a Courtesy Service for the Twin-COOK Pilot. When so is required, we send a dedicated transport crate with a Courtesy Twin-COOK Pilot so that production can continue while your machine is returned to our technical service team in Sweden. There the machine will be inspected, serviced, adjusted and overhauled by the same technicians who manufacture the Twin-COOK Pilot systems.

05

Spare parts

In-stock parts ordered before 11:00 CET are normally dispatched the same working day. The spare parts section of the Operation Manual includes exploded views, part identification and corresponding spare part numbers. Electrical components can also be identified through the electrical diagrams. When contacting Aftermarket Services, always specify the serial number of your Twin-COOK system to ensure correct part identification.